Cisco Firepower 1010 Mount The Chassis page 10

Rack-Mount the Chassis
Figure 9: Completed Rack Shelf/Tray Installation
Step 10
Install the sliding-rack tray into your rack using the correct screws (12-24 x 0.75 inch or 10-32 x 0.75 inch) from the
rack-mount kit that fit your rack type.
You can now attach your power supply cord and run it through the cable guides.
What to do next
Install the cables according to your default software configuration as described in the
Getting Started
Mount the Chassis
10
Guide.
Mount the Chassis
Cisco Firepower 1010