Moulinex Moulinette AR6887 Manual page 16

To fit the blender jug onto the motor base of the Moulinette, line up the
the front of the blender jug with the
base, then swivel the blender jug anti-clockwise. (diagram 6).
• Plug in the appliance and start it up by pressing the control button (B).
• To stop the appliance, release the control button.
• Never put your fingers or any object in the blender jug (F) when the appliance is
operating.
• Never run the blender without its lid (G) and cap (H) locked into place.
• Only remove the blender jug when the appliance has come to a full stop.
CLEANING
• To clean the motor base (A), use a damp sponge (never put it under running
water).
• All other accessories (blade (D), bowl (C), and lid (E) can go into the dishwasher.
• To clean the blender jug (F), pour a glass of hot water in it with a few drops of
washing-up liquid. Put the lid (G) back on and operate the blender for a few
seconds. Empty it out, rinse it and let it dry upside down.
• Clean all your accessories before 1st use, and after each use.
WHAT TO DO IF YOUR APPLIANCE DOESN'T WORK
• First, check the connection.
• If you have carefully followed all of these instructions and your appliance still
doesn't work, contact your dealer or an approved service centre (see the list in
the service booklet).
ELECTRICAL OR ELECTRONIC PRODUCTS AT THE
END OF THEIR USEFUL LIVES
Let's all help protect the environment!
i
Your appliance contains valuable materials which can be recovered or
recycled.
‹
Take it to a local civic waste collection point
sign at the top of the Moulinette motor
16
sign on