Status Lights - Quasar Science R2 Quick Start Manual

The Data and Wireless Status Lights can be various colors based on the connection type and status. Check that the light is in the
correct wired and wireless modes and that Status lights are enabled in the config. See Page 8 for color combinations.
Data LED
Data
Solid LED – Data Received.
Data
No Light – No Data Received or
Status Lights turned off.
7
*Check the website for the most up-to-date Status Light information.

Status Lights

Wireless LED
Solid LED – Connected to Wireless Device.
Slow Flashing – Light is paired with Wireless Device and
connected, but Transmitter is not receving data.
Fast Flashing – Light is connecting to Wireless Device
or Lamp is paired with Wireless Device but device not found.
No Light – Light is Not Paired with Wireless Device,
Wireless Mode -> Off or Status Lights turned off.