Getting Started - Quasar Science R2 Quick Start Manual

•To set the Intensity, Color Temp, +/- Green, Saturation and Hue:
1. Press or until desired function is shown on screen, and press
2. The selection carets "> <" will move from the ">Function<" to the ">Value<".
3. Press or to set the value. Press
4. The selection carets "> <" will move from the ">Value<" back to the ">Function<".
•To link an RR or R2 light to a CRMX /Wireless DMX transmitter:
. Go to Wireless Mode->Wireless DMX.
1. Double tap
2. If the "Wireless" Status Light is flashing, press and hold
3. On the DMX transmitter, tap the link button to pair.
4. The "Wireless" Status Light will start to flash and turn solid green once paired.
•When connected wirelessly to a DMX transmitter or Leader, the Wireless
signal
5

Getting Started

to save.
to unpair.
>
Intensity
1.
100%
to select.
Intensity
3.
> 87%
DMX
001
<
Intensity
2.
> <
100%
> Intensity <
4.
< 87%