Button Shortcuts - Quasar Science R2 Quick Start Manual

Min / Max Value Jump: On parameter menus such as Intensity, Color Temperature, Saturation, Hue, and Effects Parameters,
Enable/Disable Status Lights: Press and hold
Enable/Disable RDM: Press and hold
Enable/Disable Wireless: Press and hold
Reset to Default: Press and hold
Link Button: RX Mode - Press and hold
Wireless Menu: Double press
Status Screen: Double press
9
While pressing and holding
While pressing and holding
for 5 seconds to disable the status lights. Press again for 5 seconds to enable.
for 2 seconds to disable RDM. Press again for 2 seconds to enable.
for 2 seconds to disable all Wireless Functions. Press again for 2 seconds to enable.
for 3 seconds to reset the light to Default settings.
to unpair the light. TX Mode - Tap
to open the Wireless Menu.
to return to the Status Screen. When on the Status Screen, Single press

Button Shortcuts

to increase the value, tapping
to decrease the value, tapping
to send pairing signal.
will jump to the next value or max value.
will jump to the next value or minimum value.
to display additional info.