Table of Contents
Advertisement
Replacing Faulty Components
Refit thermostat phial to plate.
Reconnect gas supply and soundness test
Check flame failure device is operating
Refit fascia and cooking plate.
Fault Finding
Fault
Unit will not light
Unit will not stay lit
IN103-8
Check
Check gas supply is turned on.
Check to see if a spark is visible
through inspection hole when piezo
is pressed.
Ensure to hold the control knob in
for 10 seconds whilst lighting.
Parry-British Built for Purpose
Solution
Turn on gas supply
If no spark, contact engineer
to replace faulty parts.
If this does not work, contact
engineer to replace faulty
parts.
10
Advertisement
Table of Contents
