Advertisement
INSTRUCTION REF: IN124
ISSUE No.
1
DATE 23.02.06
Page 4 of 6
FAULT FINDING
The most common fault is that the unit is not connected to the mains supply, and so the
mains lamp will not illuminate, in this circumstance please try the following before calling
for service assistance.
1. Check the unit is plugged into the mains supply and the socket is switched on.
2. Check the fuse in the plug
3. Try a different socket
4. If the unit has been permanently connected to a fused switch ask a qualified
electrician or competent person to check the connections.
ONE OF THE ABOVE MAY CURE YOUR FAULT, IF NOT CONTACT YOUR
DISTRIBUTOR.
Your machine is fitted with a built in thermal cut-out, this will stop the element from
operating for a short time, if your machine has little or no water in it.
If both lamps are illuminated but it is not heating check that there is sufficient water in
the tank and try again, if it still does not heat up contact your distributor.
www.parry.co.uk
Advertisement
