Service Position - Panasonic Lumix DMC-G1KPP Service Manual

8.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 VFK1441
2 RFKZ0477
3 VFK1950
4 VFK1576DC202
5 VFK1286
6 VFK1576DC202
7 RFKZ0359
8 VFK1282
CAUTION-1. (When servicing FLASH SUB PCB)
1. Be sure to discharge the capacitor on FLASH SUB PCB.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH SUB PCB".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH SUB PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH SUB PCB.
Table S1 Extension Cable List
Connection
FP9001 (MAIN) - FP7701 (AF ASSIST),
FP7351 (REMOTE),
FP7300 (LP SW)
FP9006 (MAIN) - LVF UNIT
FP9005 (MAIN) - FP7201 (LCD IF)
P9003 (MAIN) - CL4901/CL4902 (HINGE SW)
FP9008 (MAIN) - REAR OPERATION UNIT
P8504 (FLASH) - TOP CASE UNIT
P8503 (FLASH) - TOP CASE UNIT
FP9010 (MAIN) - P8507 (FLASH)
41
Form
8PIN 0.5 FFC
45PIN 0.3 FFC
33PIN 0.3 FFC
2PIN CONNECTOR
16PIN 0.5 FFC
2PIN CONNECTOR
2PIN CONNECTOR
22PIN 0.5 FFC