Table of Contents
Advertisement
Operating procedure:
Note:
Operations of this program are not guaranteed when used in the
DOS
prompt mode with starting up Windows.
Refer to the instruction manual of the PC used, set the DOS prompt
mode, and execute the program.
1. Turn on the power of the PC and set the DOS prompt mode.
2. Change the directory to "CDJC50S".
3. Enter "FIELD50" and press the ENTER key."
4. If directory for storing the data is not available, enter "Y" at the
following screen and press the ENTER key.
5. The following screen appears.
Default file name
(Suffix number of file name will increase automatically)
Enter a desired file name using less than 8 characters.
(If numbers are used for the suffix of the file name, these will be
counted up automatically the next time.)
When only the ENTER key is pressed, the default file name will
be set.
This file will be saved as the log file in the directory "DATA".
After entering the file name, press the ENTER key.
6. If a file name already used once is specified, the following screen
appears. Enter "Y" or "N" according to whether to overwrite the
file, and press the ENTER key.
7
Advertisement
Table of Contents
