Table of Contents
Advertisement
DOWNLOADING THE CHANGER PROGRAM USING
THE UPDATEF.EXE PROGRAM
• Execute this program to rewrite the program of the changer of
this unit.
Preparations:
• IBM PC compatible Personal computer and display:
Use a personal computer with an HDD
• OS:
MS-DOS or PC-DOS version 5.0 or later.
• Floppy disk with latest UPDATEF.EXE software
(Includes the instruction manual (UPDATEF.PDF)) (CDJ-002:J-
2501-175-A)
• SCSI board;
The "Adaptec AVA-2904E" provided with the unit is recom-
mended.
If this is not available, use an equivalent.
• Setting the ASPI manager;
For details, refer to "Installing the ASPI manager" on page 5.
• SCSI cable
Connection:
Connected to
SCSI connector
of the PC
SCSI cable (Accessory)
Setting:
• DIP switch settings
1 Set SCSI TERM to "ON", and do not
connect other SCSI equipment as much
as possible.
2 Set MODE to "ON".
ON: Normal mode. Control the changer
using the PC.
OFF: Manual mode. Control the changer
manually using buttons.
3 Setting of SCSI ID of the drive Set a
desired ID number except 7.
Each SCSI ID must be set exclusively.
LINE-OUT
SCSI
IN
OUT
DIGITAL-OUT
SCSI IN
Fig. Connection of equipment
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE
CHANGER
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE
CHANGER
17
Advertisement
Table of Contents
