Sony CDJ-500 Service Manual page 11

15. The following screen appears at the bottom, and 1 KHz sine
wave is out put from the R-CH. If OK, enter "Y" and press the
ENTER key. Like in step 14, enter "N" and press the ENTER
key if negative.
16. The following screen appears and the results of each test are
displayed.
If the test results are satisfactory, "OK" will be displayed. For
details on the test results, refer to the PDF file provided with
the "FIELD50.EXE" software.
17. If there is a inspection to be executed again, enter the corre-
sponding number and press the ENTER key. To end, enter "E"
and press the ENTER key.
18. The following screen appears at the bottom left of the screen.
Remove the disc and close the front door.
19. The program is completed, and the following will be displayed.
Referring to the Log File:
• The results executing "FIELD50.EXE" are stored as the log file.
This file is the file name entered at step 5. To see this file on the
screen, enter the following:
To end, enter "E", or to continue, enter the corresponding number.
After checking, enter "Y" or "N".
11