Bison Baseline Collegiate 180 Degree Breakaway Goal Instruction Manual
Hide thumbs
Also See for Baseline Collegiate 180 Degree Breakaway Goal:
- Owner's manual (17 pages) ,
- Instruction manual (15 pages) ,
- Owner's manual (16 pages)
Advertisement
Quick Links
180
P A R T S L I S T
Item
Qty
Description
A
1
180 Degree Breakaway Goal
C
2
8-32 X 3/16" Round Head
Phillips Machine Screw
E
1
1/4" Long Arm Hex Key
G
2
Release Pressure Adjustment Screws (Installed)
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
The Vertical Assembly Bolt is under Extreme Spring Pressure! Do Not Adjust or Remove!
1.
Remove the two 8-32 Machine Screws (C) and remove Cover Plate (B). Mount the 180 Degree Goal
(A) to backboard with the hardware provided in the Goal Hardware Bag (H). Make sure the Goal is
level then tighten hardware. See Figure 1.
Figure 1
Date: 10/26/04
Rev: 1
—— Instruction Manual ——
DEGREE BREAKAWAY GOAL
(Installed)
B.A.
N.J.C.
Item
Qty
B
1
D
2
F
1
H
1
Warning!!!
File: \drive.f\pub\inst\180breakaway
1
Description
Cover Plate (Installed)
Nylon Net Tie
Anti Whip Net
Goal Hardware Bag
Ref#: 910184
Advertisement
Related Manuals for Bison Baseline Collegiate 180 Degree Breakaway Goal
Summary of Contents for Bison Baseline Collegiate 180 Degree Breakaway Goal
- Page 1 —— Instruction Manual —— DEGREE BREAKAWAY GOAL P A R T S L I S T Item Description Item Description 180 Degree Breakaway Goal Cover Plate (Installed) 8-32 X 3/16” Round Head (Installed) Nylon Net Tie Phillips Machine Screw 1/4” Long Arm Hex Key Anti Whip Net Release Pressure Adjustment Screws (Installed) Goal Hardware Bag...
- Page 2 Attach Net (F) to the Goal (A) by starting at position 1, which is the largest opening between the two shortest net lock tubes. Insert the Nylon Net Tie (D) through the short tube nearest position 2. Hold the net up to the bottom of the goal and push Nylon Net Tie (D) under the net and into the next net lock tube.