Customizing The Monitor - GE Corometrics 170 Series Operator's Manual

Customizing the Monitor

EXAMPLE
Press to enter the
1
user setup mode.
Use ( ) to select
2
feature code 2—FHR
High Alarm Limit.
See Table 4-2.
Press to switch
3
displays. The
heartbeat indicator
lights.
Use ( ) to change
4
the value to 185
BPM. See Table
4-2.
Press to switch
5
displays again. The
± sign lights. (Repeat
steps 2 to 5 .)
NOTE: For Models 172, 173, and 174, use the leftmost set of volume controls.
4-10
Setup Procedures: Customizing the Monitor
The monitor includes a user setup mode where you can:
enable/disable alarm functionality
set the high alarm limit for the fetal heart rate
set the low alarm limit for the fetal heart rate
set the alarm volume
set the time and date
(A 170 Series Monitor is Year 2000 compliant.)
Setting or value for
selected feature (e.g.
FHR Alarms On or 180
BPM High Alarm Limit).
1
1 2
1
Use
change the number.
1
1 2
Figure 4-12. Setup Mode Summary (Model 172 shown)
170 Series Monitor
2003023-001
Monitor Feature Code
(e.g. FHR Alarms or
High Alarm Limit).
2
Press to switch
between displays.
2
( or ) to
2
Press to switch between displays.
Repeat steps to change other settings.
Use ( or ) to
change the number.
Revision D