Enable 2-D Scanning - Elo TouchSystems 1729L User Manual

17" lcd desktop touchmonitor

Hide thumbs Also See for 1729L:

Table of Contents

The Scan Engine turns on the laser and is able to scan and decode barcodes con-

tinuouslywithout the user having to press the trigger (momentary switch). When the

Host Appli-cation software detects the DSR input HIGH (HE Switch is OFF), it sends a

'LevelTrigger' SSI command to the Symbol Scan Engine. The Scan Engine turns off the

laserand will scan and decode barcodes only when the trigger is activated.

Enable 2-D Scanning:

Your scanner default settings do not enable 2-D barcode reading ability. In order to

enable this option, follow these steps:

1) Scan the barcodes below to enable PDF417 and MicroPDF417. These are both types

of 2-D barcodes.

2) Now scan the barcode below to change your scanning pattern. Using this scanning

pattern will allow you to read 2-D barcodes (you can still read 1-D barcodes also).

*Note: These barcodes (higher resolution) can also be found in the integration guide for

the barcode scanner, which is located in the TouchTools CD.

2-23

Table of Contents