Replacing A Front Turn Signal Light Bulb; Replacing A Rear Turn Signal Light Bulb - Yamaha Y16ZR 2021 Owner's Manual

Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the vehicle on the center-
stand.
2. Remove panel A and B. (See page
8-8.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb
4. Remove the burnt out bulb by
pulling it out.
5. Insert a new bulb into the socket.
6. Install the socket (together with
EAUV0560
the bulb) by turning it clockwise.
7. Install the panels.
ECA10671
1
Periodic maintenance and adjustment
8-33
Replacing a rear turn signal
light bulb
1. Remove the turn signal light unit
by removing the screw.
1
1. Screw
2. Remove the socket (together with
the turn signal light bulb) by turn-
ing it counterclockwise.
3. Remove the burnt-out bulb by
pulling it outward.
EAUV0960
8