Tail/Brake Light; Replacing A Front Turn Signal Light Bulb - Yamaha D'elight Owner's Manual

Periodic maintenance and adjustment

Tail/brake light

If the tail/brake light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
6
EAU43041
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the center-
stand.
2. Remove cowling B. (See page
6-7.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1
1. Turn signal light bulb socket
2. Turn signal light bulb
4. Remove the burnt-out bulb by
pulling it out.
5. Insert a new bulb into the socket.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the cowling.
6-32
EAU56930
ECA10671
2