Table of Contents
Advertisement
Installation and Set-up Manual
Char.tbl
3.5.2 Protocol set-up
Select Protocol (Shift-F1) when DIRECT- or DOWNLOAD protocol is selected. This will
bring up the protocol set-up for the protocol.
This window is used to set-up a translation table between a field number used in the
communication protocol and the field number in the C1 and C1N window of the KODAK
Host C1
00:
01:
02:
03:
04:
Network ID Camera. Use the up and down arrows to move to the field above and below
and use the C1 and C1N key to change between the C1 and C1N columns. Note that 15
fields are available. They appear by pressing the down arrow when you are at the bottom
line. For more detailed description please refer to the Network Installation Manual.
3.5.3 Communication parameters Channel: AUX
In this window the auxiliary communication channel is configured. This channel is used
for different purposes.
Communication parameters Channel:
Speed
Parity
Databits
Channel
4/99
2=DIRECT - KODAK Network ID Camera direct protocol.
3=DOWNLOAD - KODAK Network ID Camera download protocol.
For more information, please read Network Installation Manual.
Only active for the Nordic countries.
Select which character table to use. A UNIX computer or a PC running MS-
DOS or Windows use different coding for national characters like the
Swedish ÅÄÖ for example.
AUTO - Fortunately, there are mostly no conflicts between the codes used
in the different character sets, which means that the KODAK Network ID
Camera can apply the translation scheme for all character sets at the same
time without any conflicts. This is AUTO.
7bit - In some cases the characters []{}\| are used for national
characters. The 7bit setting will translate these characters. The translation
depends on the country setting.
IBM - This is the PC/MS-DOS codepage 850 character set.
WIN - This is the MS-WINDOWS character set.
C1N
0
0
0
0
0
0
0
0
0
0
9600
NONE
8 bits Protocol
Char.tbl
Previous
AUX
NONE
AUTO
Next
Save
12
II 3478
Kodak AG Stuttgart
Advertisement
Table of Contents
