Main Configuration Window; Picture And Settings; Communication Param; Settings - Kodak II 3478 Installation And Setup Manual

Installation and Set-up Manual
3.3

Main configuration window

Get into configuration mode as described in chapter 3.1.
Set-up
Pictures and settings

Communication param

Settings

Sensor adjustment
Test functions
Lock
This is a menu from where to select what has to be set-up. Some of the selections will
present you yet another selection menu (first selection for example) while other selections
will present a window
where configurations can be changed (settings for example).
The soft-keys are used as follows:
Lock
Up
Down
Exit

3.3.1 Picture and settings

Here you can set details of how and what will be printed on the film.
3.3.2 Communication param
Here all settings regarding the communication between the KODAK Network ID Camera
and the equipment connected to any of the four communication ports can be changed.
The selections below are only available, if password LANEX is used.
3.3.3 Settings
Here all settings of a more general nature can be changed, e. g. which language the
KODAK Network ID Camera speaks.
4/99
Up
Lock the set-up with a password. Will make the KODAK Network ID Camera
ask for password the next time set-up is entered. An alternative to LOCK is to
wait for the password time-out.
An alternative to using the up-arrow. Will move to the selection above the
current.
An alternative to using the down-arrow. Will move to the selection below the
current.
Exit set-up mode.
Ver:2.1
Down Exit
4
II 3478
Kodak AG Stuttgart