Settings - Kodak II 3478 Installation And Setup Manual

Installation and Set-up Manual
3.6

Settings

Selecting this item will present a window where some configurations that do not fit within
the other items are gathered.
Settings
Language
Country
Cursor
Erase
Exposure data
Use the up and down arrows to move the cursor between the settings, and use Previous
and Next soft-keys to select option.
Language
Country
The country and language settings are separated because there are countries where
more than one language is common, but where the date format and PID number are the
same. Finland and Switzerland are two examples.
Available languages/countries are:
England, Iceland, Germany, France, Spain, Portugal, Holland, Italy, Sweden, Denmark,
Norway and Finland.
Cursor
Erase bookinglist at power interrupt
Exposure data optional
4/99
ENGLAND
ENGLAND
LINE FLASHING
bookinglist at power interrupt
Optional
Previous Next
Selects the language the KODAK Network ID Camera will speak. Factory
default is ENGLAND.
will select country-depending settings like date format, PID number format.
Factory default is ENGLAND.
Selects how the cursor should appear on the display. The cursor can be
selected as steady or flashing, line or block. Place the cursor at "LINE"
position to select line or block and place it at "FLASHING" position to select
flashing or steady. Factory default is LINE FLASHING.
This setting defines, whether the booking list downloaded from a host
computer should be erased or retained when the power is switched off.
Note that the setting will be changed by toggling between the words Erase
and Retain at the beginning of the sentence. Factory default is Erase.
This setting defines, whether the film may be exposed when no exposure
data has been received from an X-ray unit. The setting will be changed by
toggling between the words Optional and Mandatory. Factory default is
Optional.
Exit
18
II 3478
Kodak AG Stuttgart