Attaching The Motor Housing - HAMPTON BAY AL663A-LN Use And Care Manual

Assembly — Attaching the Motor Housing
11

Attaching the Motor Housing

CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Remove 1 of 3 screws (JJ) from the mounting ring
(KK) and loosen the other 2 screws (JJ). (Do not
remove)
□
Place the key holes on the motor housing (G) over the
2 screws (JJ) previously loosened from the mounting
ring (KK). Turn motor housing (G) until it locks in
place at the narrow section of the key holes. Secure
by tightening the 2 screws (JJ) previously loosened
and the one previously removed.
F
G
12
KK
JJ
14
Installing the Decorative Cover
□
Install the decorative cover (H) to the motor housing
(G) with the screws (LL) provided.
G
H
LL