Download
Share
Print this page
  1. Manuals
  2. Brands
  3. XONTEL Manuals
  4. Speakers
  5. XT-20W-BA
  6. Installation manual

XONTEL XT-20W-BA Installation Manual

Active bluetooth tws ceiling speaker
Hide thumbs

Advertisement

Quick Links

Download this manual
XonTel XT-20W-BA
Active Bluetooth TWS Ceiling Speaker (20 Watt )
Installation Manual
Before start the installation :
Make sure you design your Speaker Location & Qty in the right way to sound cover the area in
a good way ,below Diagram can help in this , and if you are not sure of the result pls test all the
speakers on the ground in your location before you install them on the Ceiling and before you
open the Speaker hole to make sure of the Sound coverage .
Note : Coverage Area below is for the one Speaker .

Advertisement

loading

Related Manuals for XONTEL XT-20W-BA

Summary of Contents for XONTEL XT-20W-BA

  • Page 1 XonTel XT-20W-BA Active Bluetooth TWS Ceiling Speaker (20 Watt ) Installation Manual Before start the installation : Make sure you design your Speaker Location & Qty in the right way to sound cover the area in a good way ,below Diagram can help in this , and if you are not sure of the result pls test all the speakers on the ground in your location before you install them on the Ceiling and before you open the Speaker hole to make sure of the Sound coverage .
  • Page 2 Wires connection from XT-20W-BA to the 3pcs XT-20W-BP...

  • Page 3: Aux Input

    Note : Pleas first pull out the plug of the Green socket ( SP1,SP2,SP3 ) for easy fixing the Cable from the 3pcs (XT-20BP) Speakers to the Green Socket in the back of XT-20BA . Please make sure you connect the (Red/Black) connector as prescribed ( + ) and ( - ) active speaker,Use a good quality copper wire with a diameter at least 1mm²...

  • Page 4: Installation Steps

    Installation Steps Before you Cut the below Hole in your Ceiling make sure you have enough space 15cm for your Speaker height inside the ceiling . 1- Open the hole in the Ceiling , size 165mm = 16.5cm 2- Pull the sound wires between the speakers and connect them in a good way . 3- Connect the Power Cable to the (XT-20BA) Speaker Socket and then Link the 230V power source to the Speaker DC15V Power adapter .
  • Page 5 4- Once the hole is cut remove the protective grill and insert the speaker in the hole,and make sure the fastening hooks are unscrewed .
  • Page 6 5- Tighten the fastening Screw in a clockwise direction until the speaker is Locked . 6- Insert the protective grill...
  • Page 7 UHF Microphone Note : UHF Wireless Microphone supports up to 30M Range in Open Space ,make sure to use NEW batteries. Switch ON/OFF : 1- Short Press the ( Power ) button for 1 Second to turn on the UHF Microphone. 2- Long Press the ( Power ) button for 2 Second to turn Off .
  • Page 8 The UHF microphone is connected to the active speaker (XT-20BA). But the UHF microphone has no voice transmission. Solution : A- The UHF microphone is close to the active ceiling speaker within 1 meter,Turn on the active speaker state. First of all press the (Power) button + (SET) button at the SAME TIME for 6 seconds, ( ID ) text will appears on the display, Press and must hold, C- Turn off the active speaker and restart.

  • Page 9: Remote Control

    Remote Control The Remote control can manage all the main function,in case of wrong operation check the batteries charge and if needed replace it...
  • Page 10 1- Power ON/Off. 2- Mute. 3- increase the volume. 4- reduce the volume. 5- increase the UHF microphone volume. 6- reduce the UHF microphone volume. 7- choose the desired mode.( Bluetooth, Aux input) 8- Enable the BlueTooth TWS Function (Must set two speakers,Same Model in bluetooth mode.
  • Page 11 5- Press TWS Button for 3-5 seconds to pair with TWS on both Active speakers, when TWS Activitaed , both Speakers will announce TWS is Activated , you will find only one ( XonTel XT-20BA) in your Mobile Bluetooth when you Search . Microphone Priority function, you can activate the ( Priority )