Advertisement
UHF Microphone
Note : UHF Wireless Microphone supports up to 30M Range in Open
Space ,make sure to use NEW batteries.
Switch ON/OFF :
1- Short Press the ( Power ) button for 1 Second to turn on the UHF Microphone.
2- Long Press the ( Power ) button for 2 Second to turn Off .
Change Frequency Channel :
Short Press the ( SET ) Key will change to the next Frequency Channel .
Add a Second UHF microphone to the same (XT-20BA) Active Speaker .
Make sure The UHF microphone is close to the active ceiling speaker within (1 meter),
Press the ( Power + SET ) button at the SAME TIME for 6 seconds , ( ID ) text will
appears on the display. Check now the Mic should be connected to the Speaker .
Note : (XT-20BA) Active Speaker can only Accept Max 2pcs UHF microphone at the same
time speaking.
Advertisement
