Wall - GE 29880 User Manual

W M
ALL OUNT
The Caller ID phone with digital answering system can be mounted on a
wall phone plate (not included).
1. Plug the phone cord into the phone jack on the bottom of the unit, and
wrap the extra phone line around the bottom of the base. Feed the line
cord through the grooves so that the base area is flat for wall mounting.
2. Plug the two-prong end of the AC power supply into an AC outlet and
the other end into the POWER 9V DC jack on the back of the unit. The
unit announces, "Please wait" and plays a long beep, and then three short
beeps when unit is ready for setup or to answer calls with the default
greeting and settings.
3. Connect the other end of the phone line to the modular jack on the wall.
4. Place the handset in the cradle of the base as soon as possible to hang
up the phone.
CAUTION: Only use the ATLINKS USA, Inc. 5-2498 power supply that was
packed with this unit. Using other power supplies may damage the unit.
10
I
NSTALLATION
1
2
6
3
new
options
delete dial
7
4
set
answerer on/off
greeting
memo
skip
erase
5