GE 29880 User Manual page 16

4. Press options to store the contrast setting and return to the SELECT
CONTRAST display.
S D
ETTING THE
This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.
1. After the unit enters the setup menu, press the review up button until
T/P DIAL MODE appears.
2. Press the options button to show the current dial mode. The default is
set to tone.
3. To change the dial mode, press review up or down. The display
alternates between the two modes.
4. Press options to store the dial mode and return to the T/P DIAL
MODE display.
E S
XITING ETUP
To exit the setup mode after your changes are made, select the EXIT
SETUP menu and press the options button. Alternatively, to exit the setup
menu, press the dial button.
NOTE: The phone exits setup after 10 seconds if no buttons are pressed.
IMPORTANT: The time and date are programmed automatically when the
first Caller ID information is successfully received after setup.
16
M
IAL ODE