Brewing Delicious Coffee; Hot Water - Bunn A-10 Use And Care Manual

BREWING DELICIOUS COFFEE

®
Insert a Bunn coffee fi lter into the brew funnel. (Be sure
®
to use Bunn coffee fi lters for proper brewing. There is a
difference.)
Measure coffee into the fi lter and gently shake to level the
bed of grounds.
Make sure that the sprayhead is tight. Slide the brew funnel
into the brewer under the warmer switch. Snap the decanter
cover in the decanter and place the decanter on the warmer
beneath the brew funnel. Place the lighted warmer switch
in the "ON" position.
Raise the hinged fl ip-lid and pour water into the top of the
brewer. The water pitcher, supplied, will yield approximately
eight 6 ounce cups of brewed coffee when fi lled to the top
®
line. Your Bunn Pour-Omatic
immediately.
When brewing has stopped, remove the brew funnel and
discard the fi lter and grounds. Do not touch hot grounds.
The same basic steps can be used to obtain hot water by omitting the fi lter and
coffee and using the enclosed hot water funnel. The hot water from your Bunn
coffee brewer is approximately 200˚F. This is hotter than the hot water from your
faucet and must be handled with care.
®
will begin brewing coffee

HOT WATER

7
P-206
P-205
P2081
P2079
P-215
®
10070 030100