Brewing Delicious Coffee; Hot Water - Bunn HOME MODEL NHB Use And Care Manual

Use & care of your bunn coffee brewer model nhb

Hide thumbs

Table Of Contents

Table of Contents

1. Insert a BUNN

coffee filter into the

brew funnel.

(Always use Bunn

There is a difference.)

3. Slide the brew

funnel into the

rails beneath the

warmer switch.

5. Pour in a minimum

of 4 cups, or up to a

full decanter of

cold water.

(NOTE - you must add a minimum of four cups, as indicated on the decanter, to brew.)

7. Turn on the

warmer.

9. When brewing has stopped, remove the brew funnel and discard the filter and grounds. Do

not touch hot grounds.

NOTE: Opening the lid during brew cycle will interrupt the flow of water into the tank, but will

not interrupt the brewing process. The brewed coffee already in the funnel will empty into the

decanter. When the lid is closed, the flow of water into the funnel will resume until the brewing

cycle is complete.

WARNING: Do not close the lid after pouring in water, without the decanter in place. Closing

the lid releases the hot water.

The same basic steps can be used to obtain hot water by omitting the filter and coffee. The

water from your BUNN

from your faucet and must be handled with care.