Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
1)
Before using the battery charger, read all instructions and cautionary markings on:
A) battery charger, B) battery, C) equipment connected to charger and battery
2)
This manual contains important safety and operating instructions, and therefore should be filed for
easy access.
3)
Do not touch any uninsulated parts of the battery charger, especially the input and output
connections, as there is the possibility of electric shock.
4)
During normal operation, batteries may produce explosive gas. NEVER smoke, use an open flame,
or create arcs in the vicinity of the battery charger or battery.
5)
Maintain at least 1ft (0.3m) clearance from all obstructions on all sides of the battery charger.
6)
Keep area in front of battery charger clear for at least 4ft (1.3m).
7)
Connect or disconnect the battery only when the battery charger is off to prevent arcing or burning.
8)
De-energize all ac and dc inputs to the battery charger before servicing.
9)
Do not operate the battery charger if it has been damaged in any way. Refer to qualified service
personnel only.
10) Do not disassemble the battery charger. Only qualified service personnel should attempt repairs.
Incorrect reassembly may result in explosion, electrical shock, or fire.
11) Do not install the battery charger outdoors, or in wet or damp locations unless specifically ordered
for that environment.
12) Remove all jewelry, watches, rings, etc. before proceeding with installation.
13) Check your ac input current resources before choosing input power and installing input cables.
ALL SAFETY INSTRUCTIONS
READ AND FOLLOW
i
Advertisement
Table of Contents
