Advertisement
Connecting The DI-604+ Broadband
Router To Your Network
A.
First, connect the power adapter to the receptor at the back panel of the DI-
604+ and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED will turn ON to indicate proper operation.
B.
Insert one end of an Ethernet cable to the WAN port on the back panel of the
DI-604+ and the other end to the Ethernet port located on your Cable or DSL
modem. The WAN LED light will illuminate to indicate proper connection.
C.
Insert one end of an Ethernet cable to LAN port 1 on the back panel of the DI-
604+ and the other end to an available Ethernet port on the network adapter in the
computer you will use to configure the DI-604+. The LED light for LAN Port 1 will
illuminate to indicate proper connection. (Note: Some computers already have
network adapters pre-installed.)
Restart Your Computer
2
B.
WAN Port
This is the
connection for the
Ethernet Cable to
Ethernet Port on the
Cable or DSL
Modem.
C.
LAN Ports
These are the
connections for
Ethernet cables to
your Ethernet-
enabled computers
Reset Button
Pressing this button
restores the router
to its original factory
default settings.
A.
Receptor for
Power Adapter
Advertisement
