Table of Contents
Advertisement
Restart Your Computer
Connecting Additional Computers To
The DI-624
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-624.
M1 LED – a solid
light indicates
that the DI-624 is
ready.
POWER LED – a solid
light indicates a proper
connection to the
power supply.
M2 LED – A solid light indicates
that the unit is defective.
WLAN LED – a solid
light indicates that the
wireless segment is
ready. This LED blinks
during wireless data
transmission.
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs – a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
Advertisement
Table of Contents
