Restart Your Computer; Connecting Additional Computers - D-Link DI-624M Quick Installation Manual

Restart Your Computer

Connecting Additional Computers

To The DI-624M
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers
to the remaining Ethernet LAN ports on the back panel of the DI-624M.
Status LED – a blinking light
indicates that the DI-624 is
functioning properly.
Power LED – a solid
light indicates a proper
connection to the power
supply.
When you have completed the steps in this
network should look similar to this:
WAN LED – a solid light
indicates connection on the
WAN port. This LED blinks
during data transmission.
Quick Installation Guide, your connected
3
WLAN LED – a solid light
indicates that the wireless
segment is ready. This LED
blinks during wireless data
transmission.
LOCAL NETWORK LEDs – a
solid light on the port indicates
a connection to an Ethernet
enabled computer on ports 1-4.
This LED blinks during data
transmission.