Advertisement
Restart Your Computer
Connecting Additional Computers To
The DI-764
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-764
M1 LED – a solid
light indicates
that the DI-764 is
ready.
POWER LED – a
solid light indicates a
proper connection to
the power supply
M2 LED – A solid light indicates
that the unit is defective.
11a/11b Wireless
LEDs – a solid light
indicates that the
wireless segment is
ready. These LEDs
blink during wireless
data transmission.
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs – a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
Advertisement
