Picture-2 Menu - Dukane ImagePro 9135 User Manual

Multifunctional Settings (continued)
Multifunctional Settings (continued)

PICTURE-2 Menu

With the PICTURE-2 menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
memo This menu cannot be selected at a M1-D signal.
Item
V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
RESET
26
Adjust the vertical position using the
Up Down
memo This item cannot be selected for a M1-D signal.
Adjust the horizontal position using the
Left Right
memo This item cannot be selected for a M1-D signal.
Adjust the horizontal phase to eliminate flicker using the
Right Left
memo This item can be selected only at a RGB signal or a component video
signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART
RGB.
Adjust the horizontal size using the
Large Small
memo This item can be selected only at a RGB signal.
memo When this adjustment is excessive, the picture may not be displayed
correctly. In such a case, please reset the adjustment pressing the RESET
button during this operation.
Adjust the over-scan ratio using the
Small Large
memo This item can be selected only at a video signal.
memo When this adjustment is too large, certain degradation may appear at
the frame area of the picture. In such a case, please adjust small.
Select the EXECUTE using the
EXECUTE CANCEL
The items of the PICTURE-2 menu are collectively returned to the initial setting.
Note that the item "H PHASE" is not reset.
Description
/ buttons. :
/ buttons. :
/ buttons. :
/ buttons. :
button to reset the PICTURE-2 menu items. :
MENU
MAIN
V POSITION 20
PICTURE-1 H POSITION 142
PICTURE-2 H PHASE 31
INPUT
H SIZE 1344
AUTO OVER SCAN 5
SCREEN
RESET
OPTION
NETWORK
: SELECT
/ buttons. :