Advertisement
5.4
Usage
Open program
1. Find "ECO-Marathon Monitor" in "START\All Programs".
2. Click the icon to open.
Configuration
1. Select I/O Port which is to connect to the ECO-Marathon system.
2. Set Timeout (Default is 100s).
3. Set REC ON/OFF, whether to record data or not.
4. Set recording Period (Default is 1s).
Run & Stop
1. After the configuration, press the RUN button on
the top left corner to run the program.
2. Press STOP button on the top right corner to stop
the program.
Monitor Panel
1. Ambient Temperature, Stack Temperature, Voltage, Current, Power will display as
meter and number on this panel.
Figure 5.4 Monitor panel
Figure 5.1 Configuration
Figure 5.2 RUN button
Figure 5.3 STOP button
44
Advertisement
