Advertisement
Figure 4.3
Figure 4.4
Figure 4.5
Please place the stack in vertical like
this. Then connect the gas line finished
in step 1 to stack hydrogen inlet port, as
showed in fig 4.3.
WARNING!
Do not place anything in front of
or back from the stack, which
may block off the air flow.
Connect the gas line finished in step 1 to
stack hydrogen outlet port, as showed in
fig 4.3 & 4.4.
Connect the hydrogen purge valve to the
hydrogen outlet gas line; please pay
attention to the flow direction on the
valve body, as showed from fig 4.5 to
4.8.
Step 2
Step 3
Step 4
29
Advertisement
