Control Techniques EMERSON SPM Installation Manual page 4

Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
The SPM Power Selector Module as described in this manual has been designed and
manufactured in accordance with the following European harmonized standards:
EN 61800-5-1:2007
EN 61800-3:2004
EN 61000-6-2:2005
EN 61000-6-4:2007
EN 61000-3-2:2006
EN 61000-3-3:2008
EN 61000-3-2:2006 Applicable where input current <16A. No limits apply for professional
equipment where input power >1kW.
These products comply with the Low Voltage Directive 2006/95/EC and the Electromagnetic
Compatibility (EMC) Directive 2004/108/EC.
These electronic drive products are intended to be used with appropriate motors,
controllers, electrical protection components and other equipment to form complete end
products or systems. Compliance with safety and EMC regulations depends upon installing
and configuring drives correctly, including using the specified input filters. The drives must
be installed only by professional assemblers who are familiar with requirements for safety
and EMC. The assembler is responsible for ensuring that the end product or system
complies with all the relevant laws in the country where it is to be used. Refer to the User
Guide. An EMC Data Sheet is also available giving detailed EMC information.
4
Declaration of Conformity
Adjustable speed electrical power drive systems - safety requirements -
electrical, thermal and energy
Adjustable speed electrical power drive systems. EMC product standard
including specific test methods
Electromagnetic compatibility (EMC). Generic standards. Immunity
standard for industrial environments
Electromagnetic compatibility (EMC). Generic standards. Emission
standard for industrial environments
Electromagnetic compatibility (EMC), Limits, Limits for harmonic current
emissions (equipment input current <16A per phase)
Electromagnetic compatibility (EMC), Limits, Limitation of voltage
fluctuations and flicker in low-voltage supply systems for equipment with
rated current <16A
T. Alexander
Executive VP Technology
Date: 8th June 2010
www.controltechniques.com
SPM Power Selector Module Installation Guide
Issue: 2