PRx Performance Profile PRO Squat Rack with Pull-Up Bar Install Instructions Manual page 4

Double Check Your Space
Standard installation is designed for ceilings 108" or taller. If your ceiling is shorter than 108" please
see page 12 for modifications, or contact PRx Performance.
1. Stud Spacing: All Profile® Squat Racks are designed to be mounted to wood studs with standard 16"
or 24" spacing, with or without drywall.
• To mount your rack to a wall with non-standard stud spacing, please use a stringer board. For more
information please email us at support@prxperformance.com.
• PRx recommends professional installation for mounting the wall brackets to a block, concrete, or
metal stud wall.
2. Ceiling Height: Standard installation is designed for ceilings 108" or taller. If your ceiling is shorter
than 108" please see page 12 for modifications to your installation. If you have any questions about
these modifications please email us at support@prxperformance.com.
3. Wall Width: Make sure you have at least 32" on either side from where your rack will be installed.
This will provide enough room for use with an Olympic 20kg barbell (86").
88"
32" from obstruction
4
16"
24"
19"
(701) 566-0452
16" 16"
24"
69"
108"
32" from obstruction