2. Product identification
The device can be identified by means of the manufacturing label with order code.
The most important data can be gathered therefrom. The version of the firmware,
(e. g. P07) will appear for about 1 second in the display after starting up the
device. Please hold it ready for inquiry calls.
Type designation
EC-type examination certificate no.,
Fig. 1: Example of manufacturing label
NOTE
-
The manufacturing label must not be removed!
The marking for devices with explosion-protection approval has to include
following information:
AX 14: EC-type examination certificate IBExU21ATEX1064 X
Ex-designation: II 2G Ex ia IIC T4 Gb
QM039 Issue 1
Ordering code
explosion marking
Serial number
Safety technical
maximum values
- 7 -
HS-517 User Manual