Table of Contents
Advertisement
3. Enter the Serial number, sign the calibrated by and date the date of
4. Cut out the certificate of calibration and include this with the items.
5. Commissioning
DANGER
The device has been installed properly.
The device does not have any visible defect.
6. Operation
6.1 Control and display elements
Relay 1
Fig. 5 touchpad
The device has (when configured) one LED which is allocated to the Relay. The
LED will light up when the set point has been reached and the contact is active.
The display of the measured value as well as the configuration of the individual
parameters occurs menu-driven via the seven-segment display.
QM039 Issue 1
Danger of death from explosion
-
Explosion hazard if the operating voltage is too high
(max. 28 V
Operate the device only within the specification!
-
(according to data sheet and EC type-examination
certificate)
LED
▼-button
▲- button
)!
DC
4-digit seven-
segment display
- 15 -
HS-517 User Manual
Advertisement
Table of Contents
