Configuration - Hansford sensors HS-517 User Manual

Button functions
execution of configuration:
- set the desired menu item by pushing the ▲- or ▼-button
- activate the set menu item by pushing both buttons simultaneously
- set the desired value or select one of the offered settings by using the ▲- or ▼-
button
- store / confirm the set value/selected setting and exit the menu by pushing both
buttons simultaneously

6.2 Configuration

The menu system is a closed system allowing you to scroll both forward and backward
through the individual set-up menus to navigate to the desired setting item. All settings
are permanently stored in an EEPROM and therefore available again even after
disconnecting from the supply voltage. The structure of the menu system is the same
for all types of devices, regardless of the number of contacts. However, they only differ
by the number of menus. Following figure and the menu list shows all possible menus.
Please follow the manual meticulously and remember that changes of the adjustable
parameters (switch-on point, switch-off point, etc.) become only effective after pushing
both buttons simultaneously and leaving the menu item.
QM039 Issue 1
• move forward in the menu system
(beginning with menu 1)
• increase the displayed value
note: increase the counting speed by
keeping the button pushed for more than
5 second
• move backwards in the menu system
(beginning with the last menu)
• decrease the displayed value
note: increase the counting speed: keep
the button pushed for more than 5 second
confirm the menu items and set values by
pushing both buttons simultaneously
- 16 -
HS-517 User Manual