Table of Contents
Advertisement
1. General and Safety-Related Information on this Operating Manual
This operating manual enables safe and proper handling of the product, and forms part
of the device. It should be kept in close proximity to the place of use, accessible for staff
members at any time.
All persons entrusted with the mounting, installation, putting into service, operation,
maintenance, removal from service, and disposal of the device must have read and
understood the operating manual and in particular the safety-related information.
The following documents are an important part of the operating manual:
- data sheet
- type-examination certificate
For specific data on the individual device, please refer to the respective data sheet.
Download these by accessing www.hansfordsensors.com or request them:
sales@hansfordsensors.com | phone.: +44 (0) 845 680 1957
The IS versions of our products are variants of the standard products.
In addition, the applicable accident prevention regulations, safety requirements,
and country-specific installation standards as well as the accepted engineering
standards must be observed.
For the installation, maintenance and cleaning of the device, the relevant regulations
and provisions on explosion protection as well as the accident prevention regulations
must absolutely be observed.
The device was designed by applying the following standards:
-
EN IEC 60079-0:2018
-
EN 60079-11:2012
QM039 Issue 1
- 3 -
HS-517 User Manual
Advertisement
Table of Contents
