Foreseeable Misuse; Limitation Of Liability And Warranty; Safe Handling; Safety-Related Maximum Values - Hansford sensors HS-517 User Manual

1.4 Foreseeable misuse

The digital plug-on display HS-517 must not be used particularly in the following
cases:
In areas for which the device has no approval. When the HS-517 is used in
combination with other devices, the approval of the device with the lowest approved
area applies.

1.5 Limitation of liability and warranty

Failure to observe the instructions or technical regulations, improper use and use not
as intended, and alteration of or damage to the device will result in the forfeiture of
warranty and liability claims.

1.6 Safe handling

NOTE -
Do not use any force when installing the device to prevent damage of the
device and the plant!
NOTE -
Treat the device with care both in the packed and unpacked condition!
NOTE -
The device must not be altered or modified in any way.
NOTE -
Do not throw or drop the device!
NOTE -
Excessive dust accumulation (over 5 mm) and complete coverage with
dust must be prevented!
NOTE -
The device is state-of-the-art and is operationally reliable. Residual hazards
may originate from the device if it is used or operated improperly.

1.7 Safety-related maximum values

Permissible temperatures for environment: -25 ... 70 °C
Ui = 28 V, Ii = 93 mA, Pi = 660 mW, Ci ≈ 0 nF, Li ≈ 0 µH
plus cable inductivities 1 µH/m and
cable capacities 100 pF/m (for cable by factory)

1.8 Scope of delivery

Check that all parts listed in the scope of delivery are included free of damage, and
have been delivered according to your purchase order:
- Vibration trip display HS-517
- sheet of unit labels
- operating manual
QM039 Issue 1
- 6 -
HS-517 User Manual