1.1 Symbols Used
NOTE
may result in property damage in case of non-compliance.
1.2 Staff qualification
Qualified persons are persons that are familiar with the mounting, installation,
putting into service, operation, maintenance, removal from service, and disposal of
the product and have the appropriate qualification for their activity.
This includes persons that meet at least one of the following three requirements:
-
They know the safety concepts of metrology and automation technology and
are familiar therewith as project staff.
They are operating staff of the measuring and automation systems and have
-
been instructed in the handling of the systems. They are familiar with the
operation of the devices and technologies described in this documentation.
-
They are commissioning specialists or are employed in the service
department and have completed training that qualifies them for the repair of
the system. In addition, they are authorized to put into operation, to ground,
and to mark circuits and devices according to the safety engineering
standards.
All work with this product must be carried out by qualified persons!
QM039 Issue 1
Warning word
Warning word
DANGER
WARNING
CAUTION
-
draws attention to a possibly hazardous situation that
Precondition of an action
-
Type and source of danger
-
Measures to avoid the danger.
Meaning
-
Imminent danger!
Non-compliance will result in
-
death or serious injury.
-
Possible danger!
-
Non-compliance may result in
death or serious injury.
-
Hazardous situation!
-
Non-compliance may result in
minor or moderate injury.
- 4 -
HS-517 User Manual