Safety Measures; Fcc/Ce Warning; Declaration Of Compliance - Philips WelcomeEye Link User Manual

12. SAFETY MEASURES

Damage caused by failing to adhere to the manual nullifies the warranty. We will not accept
liability for damage resulting from non-compliance!
We will not accept liability for any harm to goods or people caused by improper handling or
failure to adhere to safety instructions.
This product was manufactured in total compliance with safety guidelines. In order to
maintain this status and provide for the best possible conditions of usage, the user must
adhere to the safety instructions and warnings in this manual.
: This symbol indicates a risk of electrical shock or short-circuiting.
- Verify that all the electrical connections of the system are consistent with the usage
instructions.
- In commercial establishments, be sure to adhere to accident prevention rules for electrical
installations.
- For schools, training equipment, workshops, etc., the presence of qualified personnel is
needed to monitor operation of the electronic devices.
- Adhere to the usage instructions for other devices connected to the system.
- Contact a person with experience if you are unsure about how to operate the system or
about the safety of devices.
- Never plug in or unplug electrical devices with wet hands.
- Maintain a minimum distance around the device to ensure adequate ventilation.
- Ventilation should not be impeded by covering the ventilation opening with objects such
as a newspaper, tablecloth, curtain, etc.
- Sources of naked flame, such as a lit candle, should not be placed on the device.
- Comply with the product's operating temperature.
- The device should not be exposed to any flow or splash of liquid and liquid-filled objects,
such as a vase, should not be placed on the device.

13. FCC/CE WARNING

Note:
This equipment has been tested and found to be compliant with the limits of a Class
B device, according to European standards in force. These limits are designed to provide
reasonable protection against interference in a residential installation. This equipment
uses and may emit radio frequency energy and, if not fitted and used according to the
instructions, may cause interference to radio communication.
There is no guarantee, however, that interference will not occur in a particular system. If
this equipment causes interference to radio or TV reception, which can be established by
starting and stopping it, users are encouraged to try to correct the interference by one of
the following methods:
• Redirect or move the receptor antenna
• Increase the distance between the equipment and the receptor
• Connect the equipment to a socket belonging to a different circuit from the one to which
the receptor is connected

14. DECLARATION OF COMPLIANCE

AVIDSEN, undersigned, states that radio equipment such as WelcomeEye is compliant
with directive 2014/53/EU. The full text of the EU declaration of compliance is available at
the following address: www.avidsen.com.
GB16
WelcomeEye / Link / V1