Philips WelcomeEye Link User Manual page 30

- Or screw it straight onto the wall.
- Use the horizontal tilting bracket if you need to.
Note: If applicable, don't forget to connect the motorised control (dry contact on the back)
before fixing the intercom panel.
Use the 2 screws provided for this purpose.
Important:
The control is a dry contact. You can connect it directly to the control for your
motorised gate.
In the case of an electric latch or lock, you should use a wired auxiliary power supply to
operate the control.
Note that in this case you will need an electric lock or latch with a memory. Operation lasts
for less than one second.
GB11
WelcomeEye / Link / V1