Installation And Wiring - Philips WelcomeEye Link User Manual

6. INSTALLATION AND WIRING

Before placing the intercom panel in its permanent position, we recommend that you check
the WiFi connection.
If the panel connects to your WiFi network, you can then proceed with the permanent
installation.
If you are positioning the device outside the range of your Internet router, it might be
necessary to use an external WiFi terminal.
Important:
do not expose the camera to direct sunlight or position it facing a reflective
surface.
Tip: we recommend that the control wires for a motorised gate be passed through a sheath
to protect them from impacts and bad weather.
Step 1. :
The intercom panel is fitted at a height of approximately 1.60m.
(Don't forget to connect the access control wires, if you plan to have access control.)
You can either:
- Use the double-sided tape provided. The bonding surface must be completely smooth
and clean.
GB10
WelcomeEye / Link / V1