Resetting - Philips WelcomeEye Link User Manual

O. Installation is now complete. Press "fermer" (close).
You can view your intercom panel video by pressing the icon on the panel.
Note that the app contains several pages. Swipe your phone screen horizontally to find
this icon.
(Authorise access to the microphone.)
To end viewing, close the app or simply go back for Android phones. Double-click the image
for IOS.
Note: a delay of a few hours is required (for updating the server) before the smartphone
receives the first notifications.
You will find a full explanation of how to use the app in paragraph 9, "Advanced settings"
of the downloadable instructions on www.philips.com.
If you wish to configure another phone to the same intercom panel, there are 2 possible
ways of doing this:
- For permanent use: download the Philips WelcomeHome app onto the new
phone and log in using the email address and password of your main account.
- For temporary access: we recommend that you create a new user. You will find
the procedure for this in chapter 9 "Advanced settings" of the full downloadable
instructions on www.philips.com.

5. RESETTING

In the event of an error, or if you wish to reset the intercom panel, press the black button
(next to the micro SD card) and hold for approximately 10 seconds, then resume the
procedure from step I.
The call button flashing red indicates that the reset has been successful.
WelcomeEye / Link / V1
GB9