Device Connections; Inserting Microsd Card; Connecting To Earphones - Prestigio GeoVision 4766 Manual

Inserting microSD Card

NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Connecting to External USB Device (Charging)

Device Connections

To insert a microSD card, place
connector towards device and card
label towards the front side of the
device.
To remove a microSD card, gently
press the edge of the card to release
the safety lock and pull the card out of
the slot.
Insert the mini USB connector into the
appropriate mini USB port.
Insert the other USB connector into the
USB port on PC to start charging.
Device Connections

Connecting to Earphones

NOTE:
High volume level is a potential risk to your hearing. Please turn down
the volume before connecting the earphone and gradually turn up the
volume to a comfortable level.
Connecting to Car Charger
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after vehicle engine is started to protect the device from sudden
surges in current.
Insert earphone jack (earphones not
included) into the appropriate
earphone port to switch audio output
from device speaker to earphone.
Insert USB connector into the appropriate
USB port.
Insert car charger connector into vehicle
12V accessory/cigarette socket to start
charging.
EN - 3