Mac driver installation
Please follow the step-by-step procedures below to install your Umix1010 Rack USB
recording interface and its driver.
1. Turn on your Mac
Note:
Do not connect the Umix1010 Rack
digital audio interface to your Mac yet
2. Insert the Driver CD into your CD-
Rom.
After you have inserted the provided Driver CD
into your CD-Rom, a pop-up window should
appear as shown in Diagram 2, then click on
the "Mac" folder to open the installation files
list. Click "ICON_ Umix1010 Rack.mpkg"
3. Welcome Screen appears
Choose "Continue" when you see the Welcome
Screen shown in Diagram 3
4. Set install location
Click the "Change install location" button if you
would like to set your preferred install location;
otherwise click the "Install" button.
5. Installation start
The driver installation has started; please wait
until the process has completed.
10
Diagram 1
Diagram 2
Diagram 3
Diagram 4
Diagram 5