Mac Driver Installation - ICON Cube Owner's Manual

Mac driver installation

Please follow the step-by-step procedures below to install your Cube series USB
recording interface and its driver.
Turn on your Mac
Note: Do not connect the Cube series
digital audio interface to your Mac yet
Insert the provided driver CD into
your CD-Rom.
After you have inserted the provided
Driver CD into your CD-Rom, a pop-
up window should appear as shown
in Diagram 1, then click on the
"Mac" folder to open the installation
files list. Click "ICON_Cube.mpkg"
Welcome Screen appears
Choose "Continue" when you see
the Welcome Screen shown in
Diagram 3
Set install location
Click the "Change install location"
button if you would like to set your
preferred install location, otherwise
click the "Install" button.
Installation start
The driver installation has started,
please wait until the process has
completed.
Diagram 1
Diagram 2
Diagram 3
Diagram 4
Diagram 5