Rear Panel - ICON UMIX1010 RACK Manual

Rear Panel

1. Mic/Inst" inputs 1-8

Balanced mic/Line level inputs. These hybrid connectors will accept a
standard 3-pin XLR plug or a 1/4" TS connector.
5
6
2. Line outputs 1-8

These are balanced analog outputs on standard 1/4" TS connectors at +6dBU
line level.
3. S/PDIF coaxial I/O connectors

S/PDIF digital input and output on coaxial RCA connectors. The digital input is
selected via the Umix 1010 Rack software control panel, while the digital output
will be sent to the coaxial.
4. MIDI I/O connectors

MIDI input and output on standard 5-pin DIN connectors
5. USB 2.0 Connector

Connect it with the provided USB cable to your Mac/PC's USB connector. Your
Mac/PC must have a USB2.0 connector in order to run the full speed of Umix
1010 Rack
8
4 3
1
2